www.antislipprotectionusa.com
6)Anti Slip coating: how to prevent slipping, or skidding on slippery concrete floors and slippery surfaces?
For painted concrete floor use the Anti-Slip Floor Coating-Sealer Product #101
Application: Anti slip-Non slips Coating use directly from the bottle, apply with a clean white towel, paintbrush or roller. Keep the surface wet for penetration time of 3-5 minutes and remove surplus product before dry with a clean white towel (cotton), or baffling machine. If the sealer dries on the surface, reapply again # 01 and wipe it immediate. For better slip resistant I recommend a second coat for some surfaces. Complete the drying time in between 6 to 12 hours. Floor should be clean and dry before using this anti-slip, non-slip solution. The anti-slip sealer increases slip resistant up to 80% and prevent slipping on marble, painted concrete, or vinyl floor in wet condition.
Coverage:
Anti Slip Coating 8 Fl. Oz. bottle covers up to 300 sq. ft.
Anti Slip Coating 2 Fl. Oz. bottle covers up to 75 sq. ft.
*****
For not painted slippery concrete floors use the Anti-Slip Floor Treatment-Etching Product #102
Anti slip-Non slip solution for slippery concrete floor.
Why concentrate? Ceramic tiles, porcelain and concrete have different textures, hard surfaces, and many of them need a different treatment for slip resistance. Mix the concentrate with no less than ¾ gallon of water and no more than 1 (one) gallon per 8oz bottle of concentrate, to get the average slip resistance, 0.60 Static Coefficient of Fraction, or more.
Application: mix 8 Oz. concentrate anti slip- non slip product #2 with no less than three quarters gallon of water and no more than one (1) gallon per 8 oz. bottle of concentrate Non Slip Floor Treatment.
Apply mixed solution with a clean mop to agitate the anti-slip, non-slip product.
Application time is 10-15 minutes. Keep evenly wet adding additional non-slip solution, if necessary.
Rinse with water hose, if there are no floor drains, residue must be picked up with dry mop, sponge, or wet vacuum. This is one of the best solutions for slippery floor to increase slip resistant.
For consultation & more information please contact our representative at: 310-428-2395
Coverage:
Mix 8 Fl. Oz. concentrate with one (1) gallon water for 350-400 sq. ft. coverage. (37 sq. miters)
Mix 2 Fl. Oz. concentrate with ¼ gallon water for 80-100 sq. ft. coverage. (9 sq. miters)
References
Anti Slip Protection for Slippery Floors: just in case if an accident happens, and your floor is slip resistant and has a Static Coefficient of Fraction is 0.60 and over, then you won’t be responsible for any slip/fall accident. According to existing law your floor is safe.
Home Products Services Anti-Slip Coating Contact Us - Phone: 310-428-2395