Test Slip-resistant flooring for slippery ceramic tile

Test Slip-resistant flooring for slippery ceramic tile,

Floor Slip Resistance Testing: Floor slip resistance testing is the science of measuring the static coefficient of friction of flooring surfaces, either in a laboratory before or after installation or on floors in situ. Slip resistance testing (or floor friction testing) is usually desired by the building’s owner or manager when there has been a report of a slip and fall accident, when there has been a report of a near accident, or before the flooring is installed on the property. Flooring is tested using a meter to discover if there is a high propensity for slip and fall accidents on it, either dry or when wet with water or lubricated with other contaminants such as kitchen grease, etc. There have been numerous floor slip resistance testing tribometers and lab devices produced around the world to measure both the static and dynamic coefficient of friction, but presently there are only a few that are reliable for obtaining useful safety results and that have current official test methods. To assess a floor’s slip resistance, we first need a reliable; thoroughly researched floor friction test method, and then we will want a minimum safety criterion 0.60 to apply to the results. If the floor is likely to be lubricated with water or grease in use, it needs to be anti-slip under these expected conditions. Floor slip resistance testing can be carried out dry, wet with water, or lubricated with oils and other contaminants. Dry slip resistance is not an indicator of wet slip resistance — in fact the two often vary inversely — so reliable wet slip resistance testing is often needed as well as reliable dry testing.

Static Coefficient Of Friction (SCOF): after applying Anti Slip Sealer Coating your floor will be safe and in accordance with Building & Safety requirements. The Occupational Safety and Health Administration require that walking surfaces have a Static Coefficient Of Friction (SCOF)of 0.6 minimum, or higher, to be considered safe. After you apply Anti-Slip Coating Product #101 to the walking surface you will by pass every floor inspection. We test hazardous floors with Tester Miter Model #ASM 725 in order to make sure your floor is safe!

Anti-Slip Transparent Coating: just in case if an accident happens, and your floor is slip resistant and has a Static Coefficient of Fraction is 0.60 and over, then you won’t be responsible for any slip/fall accident. According to existing law, your floor is safe.

#1 Anti Slip, Slip Stop, Slippery Floor, Anti Slip Treatment, Anti Slip Coating, Non Slip Treatment, treatment for slippery floor, ceramic tile, tile, tiles, prevent slippery floors, tile treatment, safety floor. » Product

http://youtu.be/5K0pVy_GPEs